Home/Interactive Guide Companion
Hot Water Cylinder Litres: Bands by Household and Recovery Time
Allow roughly 35-45 litres of stored hot water per person: that works out at about 120-150 litres for a 1-2 bedroom, one-bathroom home and 250-300 litres for a 4+ bedroom house with three or more bathrooms. Cylinder sizing gets guessed almost as often as boiler sizing, and the same two failure modes apply: too small and hot water runs out when more than one person showers in succession; too large and you're paying to heat and store water you don't use. This guide sets out the commonly cited litre bands so you have a starting estimate before a survey, alongside our boiler sizing guide for the boiler side of the same job.
Quick answer
UK hot-water-industry guidance generally allows around 35-45 litres of stored hot water per occupant per day, giving typical bands of roughly 120-150 litres for a 1-2 bedroom, 1-bathroom home up to 250-300 litres for a 4+ bedroom, 3+ bathroom household. This is a directional starting point, not a final spec — a Gas Safe engineer's survey confirms the figure for your property, the same way it does for boiler output.
For the short answer when you are replacing a cylinder, read what size hot water cylinder do I need; this page is the reference for the litre-per-person figures, household bands and recovery time behind that answer.
The rule of thumb behind the estimate
UK hot-water-industry guidance commonly cited by the Hot Water Association and major cylinder manufacturers allows roughly 35-45 litres of stored hot water (at around 60°C) per occupant per day, with some retailer guides quoting a wider 45-60 litre range. Bathroom count and how many people are likely to shower in succession matter more than bedroom count alone, in the same way they do for combi boiler sizing.
Sizing bands by household
These bands are cross-checked across multiple published UK hot-water-industry sizing guides, not invented for this page — see the citations noted in our internal sizing data.
- 1-2 bedrooms, 1 bathroom, 1-2 occupants: 120-150 litres
- 2-3 bedrooms, 1-2 bathrooms, 2-4 occupants: 150-210 litres
- 3-4 bedrooms, 2-3 bathrooms, 3-5 occupants: 210-250 litres
- 4+ bedrooms, 3+ bathrooms, 5+ occupants: 250-300 litres
Size for the property, not just the current occupants
Sources on this consistently make the same point: size the cylinder to the property's realistic future occupancy, not only whoever lives there today. A single occupant in a four-bedroom, two-bathroom house is generally advised to install toward the property's own band rather than a smaller one sized to their personal usage, since a smaller household may move in later and running out of hot water is a common complaint traced back to an undersized cylinder.
Recovery time changes the picture
How quickly a cylinder reheats after use matters as much as its total capacity. A cylinder connected to a gas boiler generally recovers heat faster than one relying on a single immersion heater, which is one reason a boiler-fed cylinder can often sit toward the lower end of a sizing band while a slow-recovery setup benefits from sizing up. This is exactly the kind of property-specific judgement our free survey is for, rather than something a generic band alone can settle.
Vented or unvented affects the practical size, not just the litre figure
An unvented cylinder needs no loft tank, so a given litre capacity generally takes up less overall space than the equivalent vented set-up with its separate cold water storage tank. If space is tight, that's often as relevant to the decision as the litre figure itself — see our hot water cylinder replacement service for how vented and unvented compare for your property.
Fixed price before work starts
Every installation is priced as a fixed quote in writing after the free survey — not an open-ended hourly meter that climbs while someone guesses.
Free survey, not a phone guess
An engineer sees the property, the radiators and the existing system before anything is recommended or quoted.
Fully Gas Safe registered
Every installation is carried out by a fully Gas Safe registered engineer, with Benchmark commissioning completed.
London coverage
Available across all 33 boroughs
Same approach from Barking to Richmond. Browse a borough for local housing notes, or send your postcode for a fixed-price slot.
Frequently asked questions
What size hot water cylinder do I need for a 3-bedroom house?
For a typical 3-bedroom home with one to two bathrooms, 150-210 litres is the commonly cited band. With three or more bathrooms in regular simultaneous use, that can move up toward 210-250 litres — a free survey confirms the figure for your specific household.
Is a bigger cylinder always better?
No — an oversized cylinder for your household costs more to install and takes longer to reheat fully than it needs to. The goal is matching capacity to realistic simultaneous demand, not maximising size.
How many litres per person do I need?
UK hot-water-industry guidance commonly cited by the Hot Water Association allows roughly 35-45 litres of stored hot water per occupant per day, though some retailer guides quote a wider range up to 60 litres per person — both are directional, not a substitute for a proper survey.
Should I size for now or for a bigger family later?
Sizing guides consistently recommend sizing toward the property's realistic future occupancy rather than only today's household, since running out of hot water later is one of the most common cylinder complaints and is cheaper to avoid at installation than to fix afterwards.
Does the boiler affect what cylinder size I need?
Yes — a cylinder connected to a gas boiler typically reheats faster than one relying on an immersion heater alone, which can affect whether you size toward the lower or higher end of a given band. This is checked as part of our combined boiler and cylinder survey.
Keep reading
Related guides
Buying Guide · 3 min read
What Size Hot Water Cylinder Do I Need?
Allow roughly 35 to 45 litres of stored hot water per person. That puts a 1-2 bedroom, one-bathroom home at 120 to 150 litres, a 3-4 bedroom house with two bathrooms at 210 to 250 litres, and a 4+ bedroom house with three or more bathrooms at 250 to 300 litres.
ReadComparison · 4 min read
Unvented Cylinders: Pros and Cons for a System Boiler Replacement
An unvented cylinder is a sealed, mains-fed hot water store: strong showers and several taps at once, no loft tank. The catch is it needs good mains pressure and a qualified installer.
ReadBuying Guide · 5 min read
How to Check Your Cylinder Installer Is G3 Qualified
A Gas Safe number tells you nothing about whether someone may legally fit your unvented cylinder. Here is what to ask for, and how to check it.
ReadHomeowner Guide · 4 min read
Signs Your Hot Water Cylinder Needs Replacing
Is your hot water acting up? Spot the key signs that your cylinder may be failing and needs a professional replacement.
ReadBuying Guide · 7 min read
Small Hot Water Cylinders: What Fits a Flat or Tight Cupboard?
A small cylinder can keep stored hot water in a flat or a cramped airing cupboard. Here is what the compact, slimline and horizontal options are, what they need around them, and when to skip the cylinder altogether.
ReadThinking about a new boiler?
Tell us about the property. We'll arrange a free survey and give you a fixed quote in writing — no obligation.
Get a free survey